Investors are looking at UK heat pump and solar installers because government funding, building regulations and energy policy all point to more low-carbon installations over the rest of the decade. Electrification installers are the companies that fit heat pumps, solar panels, batteries and electric vehicle chargers, and they sit at the point where that policy turns into work on homes and buildings.
This guide sets out the investment case as government sources describe it, the risks that come with policy-led demand, and what separates an installer that can carry outside investment from one that cannot yet.
What is the investment case for electrification installers?
The investment case for electrification installers rests on demand created by public funding and building regulations, a limited supply of certified installers, and recurring work from servicing what has been installed. Government has set out multi-year funding for home upgrades and new rules for new homes, both of which need installers to deliver them.
Four strands make up the case:
- Funding. Grants and loans that reduce the upfront cost of heat pumps, solar and batteries for households.
- Regulation. Building standards that require low-carbon heating in new homes.
- Installer capacity. A workforce that government expects to need to grow.
- Recurring work. Servicing, maintenance and upgrades for an expanding base of installed systems.
The government’s own investor factsheet on heat and buildings was written to describe this market to investors, and supports the launch of the Warm Homes Plan.
What funding supports heat pump and solar installations?
Funding for heat pump and solar installations comes mainly from the Warm Homes Plan, the Boiler Upgrade Scheme and a new government-backed loan scheme. The Warm Homes Plan, published in January 2026, sets out £15 billion of public investment to upgrade up to 5 million homes by 2030, although Budget 2026 later saved £1 billion of capital grant from the Plan.
Four funding routes stand out:
- Boiler Upgrade Scheme. The Warm Homes Plan includes £2.7 billion for the scheme. Ofgem’s Boiler Upgrade Scheme page lists £7,500 towards air-to-water and ground source heat pumps in England and Wales, or £9,000 in eligible off-gas-grid homes until 31 March 2027. Ofgem’s BUS monthly scheme update records 113,079 vouchers issued and £728,385,500 in grants paid between 23 May 2022 and 31 October 2026.
- Low-income schemes. The Plan allocates over £5 billion to schemes for low-income households.
- Consumer loans. The Plan allocates an initial £2 billion to consumer loans. The Warm Homes Loan Scheme factsheet describes loans for technologies such as heat pumps, batteries and solar panels.
- VAT relief. HMRC guidance on energy-saving materials explains that a temporary zero rate of VAT applies to qualifying energy-saving materials installed in residential accommodation in Great Britain from 1 April 2022 until 31 March 2027, after which the reduced rate applies.
The history of these schemes is covered in the guide to home energy grants in England.
How do building regulations create demand for installers?
Building regulations create demand by setting standards that new homes and buildings must meet. The Future Homes and Buildings Standards require new homes in England to be fitted with low-carbon heating, such as heat pumps, and to meet higher levels of energy efficiency, which creates steady work for installers on new-build sites.
Three points matter for installers:
- Timing. The government’s investor factsheet states that the full technical specification was published on 24 March 2026, and that the standards come into force on 24 March 2027, followed by a one-year transitional period.
- Heating. The government’s response to the Future Homes and Buildings Standards consultation sets out the detailed requirements, including low-carbon heating for new homes.
- Solar. The government’s written statement to Parliament on the standards says they will see solar panels installed in the majority of new homes.
Electrification policy beyond the UK, which affects supply chains and equipment, is covered in the guide to the EU Electrification Action Plan for UK installers.
Is there enough installer capacity to meet demand?
Not yet, on government figures: installer capacity is one of the constraints government itself identifies. The Department for Energy Security and Net Zero’s Boiler Upgrade Scheme summary business case estimates around 10,000 trained installers active today, roughly 4,000 full-time equivalents, and says the workforce would need to reach around 12,000 full-time equivalents by 2030.
For investors, a constrained workforce has two sides:
- Pricing and utilisation. Companies with trained, certified engineers may be able to be more selective about the work they take on.
- Growth limits. A company cannot grow faster than it can recruit, train and supervise engineers, so capacity planning becomes part of the investment case.
Solar demand is growing too. The government’s Solar Roadmap describes the Clean Power Action Plan ambition to move from over 18GW of solar capacity to 45–47GW by 2030.
In Rostone Operating Partners’ work with heat pump and solar installers, the companies that grow steadily treat engineer capacity as a planned resource, with hours, skills and certifications tracked alongside the sales pipeline.
What are the risks of investing in policy-led demand?
The main risk of investing in policy-led demand is that funding levels, scheme rules and tax reliefs can change at each fiscal event. Demand that depends on grants can rise or fall quickly, and installers carry the cost of staff and stock through any slowdown.
Four risks stand out:
- Funding changes. Budget 2026 states that the government will save £1 billion of capital grant from the Warm Homes Plan and will maintain the Boiler Upgrade Scheme at current funding levels of £400 million in 2027-28, rising broadly in line with inflation thereafter.
- Tax changes. The temporary zero rate of VAT on qualifying installations in homes is due to end on 31 March 2027, according to HMRC guidance.
- Certification requirements. Grant-funded and loan-funded work depends on installers holding the right certifications, such as MCS, and keeping them current.
- Concentration. Installers that rely on one scheme, one housing provider or one lead source carry more risk if that source changes.
The policy position changes often, so any figures in an investment case need checking against the latest government publications at the time of the decision.
What makes an electrification installer ready for investment?
An electrification installer is ready for investment when its earnings would survive a change in funding, its operations would survive the owner stepping back, and its figures can be trusted month by month. Investors look for evidence on each, not only for a growing order book.
Five features stand out:
- Diverse demand. Work spread across private customers, commercial clients, housing providers and new-build, rather than one grant scheme.
- Recurring revenue. Servicing and maintenance contracts on the systems the company installs.
- Reliable reporting. Monthly job margins, cash and pipeline figures that management uses to run the business. The monthly KPIs an investor should see sets out the core measures.
- Certified capacity. Engineers, supervisors and company certifications that cover the work being sold, with renewal dates tracked.
- Management depth. Operations, estimating and finance that do not all run through the founder.
Investors test these features through operational due diligence, and some look to grow a strong installer through buy-and-build. The way buyers price heating companies is set out in how buyers value an HVAC company.
Rostone looks at funding concentration early in a review of an electrification installer, because the share of revenue tied to a single scheme shapes how much of the growth an investor can rely on. Investors assessing an installer can find support for due diligence and value creation on the operating partner for investors page.
Frequently asked questions
An electrification installer is a company that fits technologies which replace fossil fuels with electricity or on-site generation, such as heat pumps, solar panels, batteries and electric vehicle chargers. Many also service and maintain what they install, which creates recurring work.
The Warm Homes Plan is the government’s plan, published in January 2026, to upgrade homes and help households cut energy bills, with schemes covering different parts of the UK. For installers, its main routes are grants through the Boiler Upgrade Scheme, schemes for low-income households and government-backed consumer loans.
Ofgem lists £7,500 towards air-to-water and ground source heat pumps in England and Wales, and £9,000 in eligible off-gas-grid homes until 31 March 2027. Grant levels and eligibility rules change, so the current position is set out on Ofgem’s scheme pages.
The temporary zero rate ends on 31 March 2027, according to HMRC guidance, and the reduced rate of VAT applies to qualifying installations in homes after that. Installers quoting for work that will finish after that date need to reflect the change in their prices.
Budget 2026, published on 28 October 2026, says the Boiler Upgrade Scheme will be maintained at current funding levels of £400 million in 2027-28, rising broadly in line with inflation after that. For installers, that sets the size of the grant budget their customers will draw on.
Sources
- GOV.UK: Warm Homes Plan; Budget 2026; CBGDP investor factsheet: heat and buildings; Warm Homes Loan Scheme factsheet; The Future Homes and Buildings Standards: 2023 consultation; Solar Roadmap; Boiler Upgrade Scheme summary business case; VENSAV3035: energy-saving materials rules from 1 April 2022
- Ofgem: Boiler Upgrade Scheme; BUS monthly scheme update
- UK Parliament: Written statement on the Future Homes and Buildings Standards
Last updated: 15 November 2026




