The same certificate goes missing every month. Quotes are priced three different ways depending on who picks them up. A new office system was bought, and the team still keeps a spreadsheet alongside it. Business process improvement is a structured way of finding where a business process falls short, fixing the cause and keeping the gain.
This guide sets out seven practical business process improvement strategies, with examples from heating, ventilation and air conditioning (HVAC), electrical contracting and renewables businesses.
What is business process improvement?
Business process improvement is the work of taking one defined process, such as quoting, job booking or invoicing, and changing how it runs so it produces a better result with less waiting, rework and duplicated effort. The improvement is then written into how the work is done so it holds.
Business process improvement sits inside the wider subject of business improvement, which also covers operations, management, commercial decisions, systems and people. It overlaps with continuous improvement and Lean, but the emphasis differs: continuous improvement is the habit of improving the work week after week, while business process improvement is aimed at a named process with a start, an end and an owner. Lean business process improvement applies Lean thinking about value and waste to that one process.
A process here means a repeatable sequence of steps that turns an input into an output: an enquiry into a quote, a completed job into an invoice, a new starter into a trained engineer. Seven strategies are covered below: process mapping, root cause analysis, standardisation, simplifying before automating, measurement, Six Sigma with DMAIC, and business process management.
How does process mapping show where a process breaks down?
Process mapping shows where a process breaks down by drawing every step, decision and hand-off in order, so delays, loops and duplicated work become visible. A process map built with the people who do the work is more likely to show how the process actually runs than how it is assumed to run.
ASQ, the American Society for Quality, describes a flowchart as a common type of process map that visually represents the steps of a process, system or workflow. Its listed uses include studying a process for improvement, speeding up root cause analysis and defining where a process starts and ends.
The Improvement Cymru Academy process mapping guide, from the NHS in Wales, says process mapping should be used before any improvement, and that it helps teams understand what really happens rather than perceptions of what happens. Four of its practical points translate well to a contracting business: map the current state, capture the usual route, cross the boundaries and focus on the process.
- Map the current state. Draw what actually happens today, not what the procedure says should happen.
- Capture the usual route. Map what happens most of the time, not the one-offs.
- Cross the boundaries. Follow the work across departments, from sales to the office to the engineers and back to accounts.
- Focus on the process. Look at the steps, not the people carrying them out.
The guide suggests a high-level map of no more than six to ten steps, including the start and end points. Where the main problem is time lost between steps, value stream mapping adds the time each step takes and the time work waits in between.
Rostone Operating Partners starts process improvement work by mapping one process as it runs today, with the office team and engineers in the same room, before anything is changed; the differences between how each group describes the process can point to where the first improvement lies.
How does root cause analysis stop the same problem coming back?
Root cause analysis stops the same problem coming back by tracing it past the symptom to the cause that produced it, then changing that cause. Fixing the symptom, such as chasing a missing certificate again, deals with one case; fixing the cause changes the process so the next case is less likely to happen.
Root cause analysis covers a range of approaches and tools for uncovering the causes of problems. Three tools suit a smaller business: the 5 Whys, the fishbone diagram and the Pareto chart.
- The 5 Whys. The Improvement Cymru Academy 5 Whys guide describes it as a simple improvement tool that can help identify the source of an issue by asking “why?” repeatedly. The guide notes it may take fewer or more than five whys, that it suits easier or moderate problems rather than complex ones, and that problems in complex systems rarely have only one cause.
- The fishbone diagram. ASQ describes the fishbone diagram, also called a cause and effect or Ishikawa diagram, as a tool for identifying the many possible causes of a problem by sorting ideas into categories, such as methods, materials, machinery and measurement. The 5 Whys guide points to fishbone diagrams for more complex problems.
- The Pareto chart. ASQ describes a Pareto chart as a bar graph in which the bars show frequency or cost, arranged with the longest bars on the left, so the most significant causes stand out. It suits problems with many causes where effort needs to go to the largest first.
An illustrative example: a business finds that completed jobs keep waiting for paperwork. Asking why shows the job sheet goes back to the office at the end of the week; asking why again shows the engineers have no way to submit it from site; asking again shows the job system was set up without a mobile form. The cause is the set-up, not the engineers.
Why does standardising a process come before speeding it up?
Standardising a process comes before speeding it up because when a process runs differently each time, it is hard to tell whether a change has made the difference. Once everyone follows the same agreed method, the business has a baseline to compare against, and any change can be tested and kept if it works. How published models such as ADKAR and the PDCA cycle help a process change take hold with the people doing the work is covered in change management frameworks compared.
The Lean Enterprise Institute defines standardised work as establishing precise procedures for each operator’s work in a production process. Adapted to a contracting office, the equivalent is an agreed way of pricing a quote, booking a job or closing a job file, written down and followed by everyone who does it.
A standard does not need to be long. A one-page checklist for the handover from sales to the operations team, or a pricing sheet for the ten most common jobs, can remove much of the variation. What a standard operating procedure includes, and how SOPs work with an operations manual, is covered in the guide to standard operating procedures.
A standard is the current best way, not a permanent rule. When someone finds a better method, the standard is updated so the improvement becomes the new normal rather than one person’s habit.
When does automating a process work best?
Automating a process works best after it has been mapped, simplified and standardised, not before. Automating a step that should not exist, or a hand-off with no agreed rule, can make the same problems happen faster and leave them harder to see inside the software.
Adoption of artificial intelligence (AI) tools is rising across UK businesses. The Office for National Statistics article Artificial intelligence in UK businesses: 2023 to 2026 (July 2026), based on its Business Insights and Conditions Survey, reports that self-reported AI use among UK businesses with 10 or more employees rose from around 12% in late 2023 to around 35% in June 2026, with much lower use in construction (13%). The ONS reports that improving business operations is the most common use of AI in every business size band.
Rostone’s working rule is operations first, automation second: a process is simplified, standardised and measured before any software or AI is applied to it. Re-keying the same job details into a quote, a job system and an invoice is a good candidate for automation once everyone agrees which system holds the master record.
Where the delay sits in the queues between stages rather than in the typing, a new system may not help at all. How queues, lead time and the slowest stage set the pace of a workflow is covered in the guide to workflow efficiency.
How is business process improvement measured?
Business process improvement is measured by recording how a process performs before a change and comparing it with how it performs afterwards, over enough weeks to show a real shift. Useful measures are time taken, errors or rework, cost and how often the process is completed right first time. Where the starting point is unclear, an operational business audit, which reviews how work is won, priced, delivered and paid for can set the baseline across several processes at once.
In the latest ONS data, use of key performance indicators is the lowest-scoring area of management practice. The ONS bulletin Management practices in the UK: 2016 to 2023 (May 2024), covering firms with 10 or more employees and excluding agriculture, financial services and the public sector, scored continuous improvement highest of its management practice areas at 0.80 in 2023, and the use of key performance indicators lowest at 0.42, on a scale from 0 to 1. The ONS labels these official statistics in development.
Four measures fit common contracting processes: quote turnaround in working days, the share of jobs needing a return visit, days from job completion to invoice, and the share of invoices queried by customers. The dates behind each measure may already be held in the job system or accounts package.
A single before-and-after figure can mislead, because process results vary from week to week. ASQ describes a control chart as a graph used to study how a process changes over time, with a central line for the average and upper and lower control limits set from historical data. A simpler run chart, plotting the weekly figure in time order, can help show whether a change has moved the trend or only produced one good week.
Where do Six Sigma and DMAIC fit in a smaller business?
Six Sigma and DMAIC fit in a smaller business where a recurring problem has enough data to analyse, such as invoice errors or repeat call-outs. The DMAIC sequence of define, measure, analyse, improve and control can be followed as a plain problem-solving structure on one recurring problem, while full Six Sigma projects rely on reliable data and trained practitioners.
ASQ describes Six Sigma as a method that provides organisations with tools to improve the capability of their business processes, and states that Six Sigma quality performance means 3.4 defects per million opportunities, allowing for a 1.5-sigma shift in the mean. A target framed per million opportunities is easiest to apply where volumes are high; a contracting office handling a few hundred invoices a year has far less data to work with.
ASQ describes DMAIC as a structured problem-solving approach for improving existing processes that do not meet performance standards or customer expectations. Its five phases are define, measure, analyse, improve and control, and each can be put as a plain question:
- Define. What is the problem, which process does it sit in, and who is affected?
- Measure. How does the process perform today, using data that can be trusted?
- Analyse. What are the root causes of the poor performance?
- Improve. Which change addresses those causes, and does it work when tested?
- Control. How will the gain be held, through mistake-proofing, ongoing measurement and standard operating procedures?
DMAIC is one of several structured approaches. How it compares with Lean, the Plan, Do, Check, Act cycle, ISO 9001 and other models is set out in the guide to business improvement frameworks.
How is business process improvement different from business process management?
Business process improvement changes one process at a time, while business process management is the ongoing discipline of running all of a business’s main processes end to end, with owners, measures and regular review. Process improvement projects are one of the activities business process management keeps going.
The Workflow Management Coalition defines business process management (BPM) as a discipline involving any combination of modelling, automation, execution, control, measurement and optimisation of business activity flows, in support of enterprise goals, spanning systems, employees, customers and partners within and beyond the enterprise boundaries.
In a contracting business, business process management can be as simple as a list of the main processes from enquiry to cash, a named owner for each, and a monthly review of one or two measures per process. That is also the base of operational excellence, where improvement becomes part of how the business is run.
What are some business process improvement examples in a contracting business?
Business process improvement examples in a contracting business include shortening quote turnaround, cutting return visits caused by missing parts, closing job files faster and reducing invoice queries. Each starts with one process, one measure and one cause, rather than a change to everything at once.
Four illustrative examples show how the strategies combine in HVAC, electrical contracting and renewables businesses: quoting, materials, job paperwork and invoicing.
- Quoting. A heat pump installer maps its quote process and finds every quote waits for one estimator. A standard pricing sheet for common system sizes lets a second person prepare routine quotes, and quote turnaround is tracked weekly.
- Materials. An electrical contractor runs a Pareto chart on return visits and finds most are caused by missing parts. A pre-visit materials check is added to the booking process, and the return-visit rate is plotted each week.
- Job paperwork. A solar and battery installer finds completion certificates wait for the engineer to return to the office. A mobile form at job completion replaces the paper job sheet once the steps are agreed.
- Invoicing. A maintenance contractor uses the 5 Whys on queried invoices and finds variations are not recorded on site. A variation step is added to the job sheet, and invoice queries are counted monthly. The wider route from winning work to getting paid is covered in the quote to cash process.
Rostone looks at business process improvement through the four GRAX options: Grow, Raise, Acquire and Exit. To grow, mapped and standardised processes can let new staff take on work without the owner checking every step. To raise finance or acquire, measured processes give a lender or acquirer evidence of how the business runs. To exit, documented processes with named owners can make the business easier for a buyer to take on.
The business improvement service page explains how an operating partner works with owners of HVAC, electrical contracting and renewables businesses each month on margin, cash and capacity, with process improvement as part of that work.
Frequently asked questions
Continuous improvement is the ongoing habit of finding and fixing problems across the business. Business process improvement applies that habit to one named process, such as quoting or invoicing, which has a clear owner and measure.
The main business process improvement techniques include process mapping, root cause analysis tools such as the 5 Whys and Pareto charts, standardised work, automation after simplification, measurement with run or control charts, and the DMAIC method. Smaller businesses can start using process mapping, the 5 Whys and Pareto charts with a whiteboard, sticky notes and data from the job system.
The length of a business process improvement project depends on the size of the process and how much data is available. A single office process, such as completion to invoice, can be mapped in a session of a few hours, and the effect of a change can take several weeks of measurement to show whether it has held.
A contracting business can start with the process where delay or rework costs it most, such as completion to invoice, which sits close to cash, or quoting, where customers wait. Choosing one process with a clear start, end and measure keeps the work small enough to run alongside paid jobs.
Business process improvement prepares a process for automation and AI by removing unnecessary steps and agreeing one standard way of working first. Automating an unclear or inconsistent process can repeat the same errors faster. Once a process is simple, standard and measured, software can take over repetitive steps such as re-keying job details.
Sources
ASQ (American Society for Quality): Flowchart; Fishbone; What is a Pareto chart?; Control chart; What is Six Sigma?; DMAIC
Improvement Cymru Academy (NHS Wales): Toolkit guide: process mapping; Toolkit guide: the 5 Whys
Lean Enterprise Institute: Lexicon: Standardized Work
Office for National Statistics: Artificial intelligence in UK businesses: 2023 to 2026; Management practices in the UK: 2016 to 2023
Workflow Management Coalition: What is BPM?
Last updated: 13 November 2026




